You searched for "KMH J-48854-5"
-
Loading...
- Designed for use on all types of gasoline engines, except those with fuel injection, this Dayco® Fuel Line Hose offers excellent resistance to oil, gasoline, grease, and weather.
- It is constructed with a neoprene cover and nitrile tube for use with leaded, unleaded gasoline and diesel fuel.
- Reinforced with a single ply of braided cord, this Dayco® Fuel Line Hose meets SAE J30R7 requirements, and meets the fuel permeation requirements of SAE J1527 Class 2 specifications.
- This hose specification does not meet any EPA or California Resources Board emissions requirements; and, should be used only on vehicles exempt from such emmision regulations.
- Note:NOT suitable for gasoline/oil mixed fuels, alcohol blended fuels, or bio-diesel fuel.
- NOT suitable for fuel injection systems.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Retrieving price...VMRS: 001-002-022 - HOSE - WATER HEATERLoading...
- Designed for heavy duty and off-road equipment service, Dayco® Heavy Duty Heater Hose is made with the highest quality EPDM compounds and heavy duty spiral reinforcements to withstand high coolant and under-hood temperatures of -40°F (-40°C) to +257°F (+125°C) and provide excellent resistance to coolant and coolant additives.
- This hose meets and exceeds SAE 20R3, Class D-1, Type EC, standard wall construction requirements.
- This Heavy Duty Heater Hose is another Dayco® product proudly made in the USA.
- Note:This hose is NOT suitable for fuel or oil transfer.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Retrieving price...VMRS: 001-002-022 - HOSE - WATER HEATERLoading...
- This premium Dayco® Insulone® Heater Hose delivers heated coolant to the heater core with minimal heat loss.
- The synthetic EPDM rubber compounds and spiral reinforcement gives this hose excellent burst strength, heat resistance, and compatibility with all common coolants and coolant additives.
- A special compound used in the insulating layer provides an added measure of protection against heat loss.
- Built with a black cover, this hose is similar to SAE 20R3, Class D-2 with a temperature range of -40°F (-40°C) to +257°F (+125°C).
- This Dayco® Insulone® Heater Hose is another Dayco® product proudly made in the USA.
- Note:NOT suitable for fuel or oil transfer.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Retrieving price...VMRS: 001-002-022 - HOSE - WATER HEATERLoading...
- Designed for long life in heavy duty applications, this Dayco® Silicone Heater Hose is highly resistant to the deteriorating effects of oil, ozone, coolants, and coolant additives.
- This hose is made with special silicone compounds and reinforced with one ply of braided polyester yarn.
- When installed properly with special silicone clamps, this hose will give up to six times longer service life than ordinary coolant hose.
- In addition to being extremely flexible, this hose meets the requirements of SAE 20R3, Class A and has a temperature rating of -40°F (-40°C) to +350°F (+175°C).
- This Silicone Heater Hose is another Dayco® product proudly made in the USA.
- Note:This hose is NOT suitable for fuel or oil transfer.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Loading...
- Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings.
- Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings.
- Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements.
- The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
- Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising.
- In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Retrieving price...VMRS: 001-002-022 - HOSE - WATER HEATERLoading...
- The Dayco® Brass Heater Hose Connectors are made of high quality brass to withstand high engine temperatures, high clamping pressure and to resist corrosion.
- These connectors have raised ribs that helps to lock the hose to the connector and improves the seal between the hose and connector.
- These brass connectors are compatible with all traditional engine coolants.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Retrieving price...VMRS: 053-008-003 - HOSES & TUBINGLoading...
- Designed for a wide range of light and heavy duty truck applications where the radiator hose routing is relatively straight, Dayco Heavy Duty Straight Radiator Hose is made with the highest quality woven mesh fabric reinforcement, neoprene cover, and nitrile tube compounds to withstand the most corrosive elements in diesel engines:oil, coolants, coolant additives, and temperature ranges of -40°F (-40°C) to +212°F (+100°C).
- This hose meets SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction.
- This Heavy Duty Straight Radiator Hose is another Dayco® product proudly made in the USA.
- Note:This hose is NOT suitable for fuel or oil transfer.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Retrieving price...VMRS: 053-008-003 - HOSES & TUBINGLoading...
- Specifically designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine, this Dayco® Standard Heater Hose is constructed using all EPDM compounds and spiral reinforcement for high burst strength and excellent heat resistance.
- Made for general service on light trucks and passenger cars, this hose is similar to SAE 20R3, Class D-2 and has a temperature rating of -40°F (-40°C) to +257°F (+125°C).
- This Dayco® Standard Heater Hose is compatible with all common coolant and coolant additives.
- Note:This hose is NOT suitable for fuel or oil transfer.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Retrieving price...VMRS: 001-003-127 - HOSE - COOLANT, AUXILIARY HEATERLoading...
- Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings.
- Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings.
- Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements.
- The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
- Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising.
- In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading... -
Retrieving price...VMRS: 002-035-021 - TUBING (HOSE) - WINDSHIELD WASHERLoading...
- Designed for OE multiple groove pulleys, Dayco® Banded V-Belts are specifically designed for applications where original equipment pulley drive design requires the use of two v-belts joined together by a tie band.
- The belts Raw Edge® construction, 3-ply laminated fabric and neoprene compounding ensures superior gripping power while the bottom cog construction provides extreme flexibility and cooling.
- By combining two belts utilizing the tie-band process, the Dayco® Banded V-Belt greatly reduces the tendency for single belts, when subjected to fluctuating load tensions, to come off or turn over in multiple belt pulley drives.
Warning: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Loading...Loading...