-
Récupération du prix...VMRS : 053-008-003 - HOSES & TUBINGChargement...
- Specifically designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine, this Dayco® Standard Heater Hose is constructed using all EPDM compounds and spiral reinforcement for high burst strength and excellent heat resistance.
- Made for general service on light trucks and passenger cars, this hose is similar to SAE 20R3, Class D-2 and has a temperature rating of -40°F (-40°C) to +257°F (+125°C).
- This Dayco® Standard Heater Hose is compatible with all common coolant and coolant additives.
- Note:This hose is NOT suitable for fuel or oil transfer.
Avertissement: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Chargement...Chargement... -
Récupération du prix...VMRS : 001-002-022 - HOSE - WATER HEATERChargement...
- This premium Dayco® Insulone® Heater Hose delivers heated coolant to the heater core with minimal heat loss.
- The synthetic EPDM rubber compounds and spiral reinforcement gives this hose excellent burst strength, heat resistance, and compatibility with all common coolants and coolant additives.
- A special compound used in the insulating layer provides an added measure of protection against heat loss.
- Built with a black cover, this hose is similar to SAE 20R3, Class D-2 with a temperature range of -40°F (-40°C) to +257°F (+125°C).
- This Dayco® Insulone® Heater Hose is another Dayco® product proudly made in the USA.
- Note:NOT suitable for fuel or oil transfer.
Avertissement: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Chargement...Chargement... -
Chargement...
- Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings.
- Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings.
- Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements.
- The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
- Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising.
- In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.
Avertissement: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Chargement...Chargement... -
Récupération du prix...VMRS : 001-003-127 - HOSE - COOLANT, AUXILIARY HEATERChargement...
- Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings.
- Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings.
- Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements.
- The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
- Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising.
- In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.
Avertissement: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Chargement...Chargement... -
Chargement...
- Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings.
- Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings.
- Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements.
- The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
- Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising.
- In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.
Avertissement: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Chargement...Chargement... -
Récupération du prix...VMRS : 013-009-055 - HOSES - COOLANT, AIR COMPRESSORChargement...
- Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings.
- Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings.
- Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements.
- The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
- Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising.
- In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.
Avertissement: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Chargement...Chargement... -
Récupération du prix...VMRS : 001-002-022 - HOSE - WATER HEATERChargement...
- The Dayco® Brass Heater Hose Connectors are made of high quality brass to withstand high engine temperatures, high clamping pressure and to resist corrosion.
- These connectors have raised ribs that helps to lock the hose to the connector and improves the seal between the hose and connector.
- These brass connectors are compatible with all traditional engine coolants.
Avertissement: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Chargement...Chargement... -
Récupération du prix...VMRS : 001-002-022 - HOSE - WATER HEATERChargement...
- The Dayco® Brass Heater Hose Connectors are made of high quality brass to withstand high engine temperatures, high clamping pressure and to resist corrosion.
- These connectors have raised ribs that helps to lock the hose to the connector and improves the seal between the hose and connector.
- These brass connectors are compatible with all traditional engine coolants.
Avertissement: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Chargement...Chargement... -
Récupération du prix...VMRS : 042-003-008 - PULLEY - IDLER, FAN DRIVENChargement...Pas de description disponible.
Avertissement: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Chargement...Chargement... -
Récupération du prix...VMRS : 042-003-008 - PULLEY - IDLER, FAN DRIVENChargement...Pas de description disponible.
Avertissement: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Chargement...Chargement...